Model: nc1503l
Contact Us or call for pricing: 866.771.0266
Designed for theaters with screens (up to 55.4 ft. wide), NEC's NC1503L is the latest DCI compliant B Laser DLP cinema projector. Delivering precise 2K (2048 x 1080) resolution, 3-D capabilities and high contrast images (1600:1), this model is easy to operate, extremely user-friendly and requires minimal maintenance providing up to 50,000* hours of laser life for unsurpassed TCO. Designed to work with all Series2 Integrated Media Server (IMS).
  • 3D content utilizes the projector's full 2K resolution and triple flash technology for smooth motion
  • Lamp free projector uses an B laser module
  • Approximately 50,000* hours of expected usage of the laser and DMD (depends on environmental conditions)
  • Direct selection buttons for eight stored projector configurations
  • Auto brightness control maintains constant brightness by adjusting the laser power as it ages
  • Complete line of (5) bayonet-style lenses with electronic zoom, focus and lens shift
  • Memory functions for lens position and light output simplify frequent operation



Legal Disclaimer To California Residents
WARNING: This product can expose you to chemicals including Styrene and Formaldehyde (gas), which are known to the State of California to cause cancer, and Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov


Display

Native Resolution 2048x1080 Maximum Resolution 2K 2048 x 1080
Contrast Ratio (typical) 1600:1 Lifetime 2 years / 50,000* hours

Synchronization Range

Horizontal (Analog/Digital) 15-100kHz (RGB: 24kHz or over) Vertical 50-120Hz

Signal Compatibility/Connectivity

External Control 2 × RJ45 (4 GPI and 6 GPO); 3 × RJ45 Gigabit Ethernet Output Terminals
Monitor Out:
1x3D(D-sub 15pin female), 1xGPIO(D-sub 37pin female), 1xUSB(Type-A), 1xLAN(100Base-T, RJ45), 1xSERIAL(RS-232C, D-sub 9pin female)

Power Consumption (typical)

On 1837W Power Savings Mode TBD
Input Current 10.5A Power Requirements 200 – 240V AC, 50/60Hz Single Phase
Power Supply Voltage 200 - 240V AC, 50/60Hz Single Phase  

Physical Specifications

Dimensions (WxHxD)
Product:
27.6 x 12.3 x 32.0 in. (700 x 313 x 812mm)
External:
27.6 x 13.1 x 32.0 in. (700 x 333 x 812mm)
Shipping:
35.8 x 19.1 x 44.6 in. (909 x 484 x 1132 mm)
Weight
Net Weight:
150 lbs. / 68 kg (excluding lens)
Shipping:
180 lbs. (81.5 kg)

Environmental Conditions

Operating Temperature 50-96°F / 10-35°C Operating Humidity 10 to 85% Humidity (Non-Condensing)
Operating Altitude 0 to 3000 m (9,800 ft) Storage Temperature 14-122°F / -10 50°C
Storage Humidity 10% - 85% (non-condensing) Storage Altitude 0-12,000m / 0-39,370ft (above sea level)

Limited Warranty (parts & labor)

Registered owners receive a 2-year parts and labor warranty  

Additional Features

Motorized focus, zoom, horizontal/vertical shift, light shutter (dowser) / Lens memory stores lens setting (shift/zoom/focus) / Range of shift is dependent on lens  

Optical

Lens Shift +/-0.15 Vertical, +/-0.10 Horizontal Light Output(Lumens) 14,000 Lumens
Light Source Life 50,000* hours Throw Ratio 0.84 to 1.26:1 zoom / 1.2 to 1.72:1 zoom / 1.33 to 2.1:1 / 1.62 to 2.7:1 zoom / 2.09 to 3.9:1 zoom
Projection Distance 2.9 - 35.9 ft. / 0.9 - 10.9 m Projector Angle +10/- 15° (Up / Down)
Lens
Zoom:
Motorized
Focus:
Motorized
F number, fnumber:
(NP-9LS08ZM1) F=2.5, f=18.6-26.7mm, (NP-9LS12ZM1) F=2.5, f=18.6-26.7mm, (NP-9LS13ZM1) F=2.5, f=20.7-32.7mm, (NP-9LS16ZM1) F=2.5, f=25.2-42mm, (NP-9LS20ZM1) F=2.5, f=32.2-60.3mm
 

Mechanical

Installation Orientation Floor/Front, Floor/Rear, Ceiling/Front, Ceiling/Rear Fan Noise 50dB
Regulations UL62368-1 3rd Edition, FCC Part15 ClassA (ANSI C63.4-2014)/ CAN/CSA C22.2 No.62368-1:19 3rd Edition, CAN ICES-3(A)/NMB-3(A) / Mexico NOM-019-SCFI-1998 / Laser Safety US: IEC60825-1 Ed3:2014 Class1, IEC62471 2015 Risk Group3, Laser Notice No. 57, This product complies with performance standards for laser productsunder 21 CFR Part 1040 except with respect to those characteristicsauthorized by Variance Number 2015-V-3435 effective on April 7, 2016. Optional Lenses Zoom lens 0.84-1.26 (NP-9LS08ZM1), Zoom lens 1.2-1.72 (NP-9LS12ZM1), Zoom lens 1.33-2.1 (NP-9LS13ZM1), Zoom lens 1.62-2.7 (NP-9LS16ZM1), Zoom lens 2.09-3.9 (NP-9LS20ZM1)

Accessories

Optional
  • Zoom lens 0.84-1.26 (NP-9LS08ZM1)
  • Zoom lens 1.2-1.72 (NP-9LS12ZM1)
  • Zoom lens 1.33-2.1 (NP-9LS13ZM1)
  • Zoom lens 1.62-2.7 (NP-9LS16ZM1)
  • Zoom lens 2.09-3.9 (NP-9LS20ZM1)
  •  

    Projection Method

    3-chip DLP Cinema® Technology  

    Primary Lenses

    Zoom lens 0.84-1.26 (NP-9LS08ZM1), Zoom lens 1.2-1.72 (NP-9LS12ZM1), Zoom lens 1.33-2.1 (NP-9LS13ZM1), Zoom lens 1.62-2.7 (NP-9LS16ZM1), Zoom lens 2.09-3.9 (NP-9LS20ZM1)  

    Lens Adjustment Functions

    Motorized focus, zoom, horizontal/vertical shift, light shutter (dowser) / Lens memory stores lens setting (shift/zoom/focus) / Range of shift is dependent on lens  

    Light Source

    Laser Light Source  

    Supported Screen Size (maximum)

    Up to 55.4 ft. / 16.9m  

    Cooling Method

    Air and liquid cooling inside  

    DMD Specifications

    0.69” S2K DLP Cinema® Chip  

    Notes

    *** Subject to installation conditions. Maximum screen size is under the conditions of 14-ft-L @ screen gain 1.8
    ***** When the AC power to the projector power supply and the lamp power supply are provided by a single cable
     

    SHARP/NEC Launches new NC603L and NC1503L Laser Projectors
    Newest addition to Digital Cinema Projector Series offers RB Laser Phosphor technology for a speckle-free, high-quality image and no external chiller for easy, flexible installation

    • Important Information card, Service door key, Power cord stopper, NFK
    Contact Sales Contact Support